2D laser scanner R2000

There is no Escape

Using the 2D laser scanner, the R2000 can detect protruding objects close to the surface, and it even can detect moving objects thanks to the high scan rate. When hung upside down, millimeters from the ground, the scanner has no problems detecting the tiniest of deviations. Its 360° all-round view means nothing escapes the R2000.

360° all-round view of the R2000. (Photo: Pepperl+Fuchs)

Many applications involve extremely restricted installation space, as well as requiring extremely complicated measuring tasks. Both recording of contours and monitoring of surfaces need to be performed accurately. However, the inspection period to perform these tasks is often very short and, in many cases, interference is a factor. Thanks to the R2000, these kinds of difficult conditions are no longer mission impossible - but mission possible.

Compact, quick, precise
The R2000 measuring module is not stationary instead, it rotates around its own axis. In addition to providing a continuous all-round 360° view, the rotating measuring head ensures that the entire scanner has a compact design. As a result, the optical face - positioned just below the edge of the housing - allows the device to be installed directly above the surface of the area being monitored.

The easily visible measuring beam enables the R2000 to be aligned without the need for any additional aids, thereby making eye-protection for laser class 1 unnecessary.

The measuring method utilizes pulse ranging technology (PRT): real-time pulse ranging measurements that are synonymous with low response times and a high level of immunity to extraneous light. The high scan rate of 3.000 revolutions per minute and the 250.000 individual measurements per second allow highly accurate measurements.

In contrast to many other scanners, the measuring optics of the R2000 are not based on lens optics, but on mirror optics. Beam deflection, usually the result of mirror mechanics, is no longer necessary and any subsequent inaccuracies are thereby completely avoided. These characteristics enable light spot imaging that is identical across the entire measuring angle and a completely flat scanning surface. The light spot geometry is designed such that the diameter is not exceeded by a few millimeters even at greater distances. As a result, it is possible to install the scanner just slightly above the surface of the object being inspected, allowing structures smaller than one millimeter to be detected.

Direct and simple to use
Another highlight is the integrated, interactive all-round display. By rotating the measuring module and the 24 LED on the back of the module, the display is able to show text and graphic messages. Having this kind of display allows the module to be commissioned using a PC or laptop. Operating and diagnostic information can be issued directly via the display during operation. All of these features make the R2000 the world`s only scanner that accurately detects contours and the smallest of objects close to the surface - not even the tiniest deviation escapes.  pb


Das könnte Sie auch interessieren


xetto® transportiert, hebt, verlädt und fährt mit

Die von HOERBIGER entwickelte mobile Ladehilfe xetto® klettert nach der Fahrzeugbeladung aus eigener Kraft auf die Ladefläche. Somit kann eine Person schwere Lasten am Einsatzort allein entladen und bewegen. Neu: xetto® wird als Arbeitsmittel für körperlich beeinträchtigte Menschen vom Integrationsamt gefördert.



Automated Relubrication System

Schaeffler Dura Sense is now available for linear recirculating ball bearing and guideway assemblies. Schaeffler integrates sensors and vibration analysis into its linear guidance systems and offers these mechatronic components with automated...


marking and coding

Hunting lion

Industry 4.0 moves into product marking and coding. Paul Leibinger enables manufacturing companies to enter the Industry 4.0 era with high-level cost-effectiveness.